Hybrid Charge Controller (IHCC 45/60)

Hybrid Charge Controller (IHCC 45/60)

FEATURES

 
  • Automatic identification of system voltage level.
  • Up to 98% power conversion efficiency.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar PV module and Battery.
  • State of battery charging indicated by LED.
  • Automatic temperature compensation.
  • Battery LVD Disconnection.
 

Specification

Model IHCC 45W IHCC 60W
Charge Controller Specification
System Voltage 24V
Max Charge / Load Current 10A
Float Charge 27.6V±0.2V
Boost Charge 28.8V ±0.2V
Equalization Charge 28.8V±0.2V
Peak conversion Efficiency Upto 98%[MPPT]
Low Voltage Disconnect 22.0V±0.1V
Reconnect Level 25.6V ±0.1V
Overvoltage Protection 30.0V
Under voltage Protection 21.0V
Max Panel Power 250Wp
Max. Panel Voltage 50Voc
LED Indications Yellow->System on, Green ->Charging, Red-> LVD
Temperature Compensation -50mV/k
Idle Self consumption <20mA
Ambient Temperature 0°C ~ 55°C for charging
-20°C ~ 50°C for Discharging
Battery Type VRLA/GEL/FLOODED
Type of Protection IP65
Radiating Mode Natural Cooling
Protections PV Reverse , battery Reverse, Over charge & discharge,Overload ,output short circuit[CC end]
Driver Specification
Input Voltage range (AC) 90 to 270V
Input Voltage range (DC) 20 to 35V
Input Frequency (Hz) 50Hz
Power Factor >0.95
I THD <10%
Power (incl. Driver) 45W 60W
Output Voltage 30V 42V
Output Current to string 1400mA
Protection Input over voltage, Under Voltage, Short circuit, Surge [4KV]
Priority Function When battery discharge, AC mains will ON the LED Load/Light only. It will not charge the battery