EV CHARGER - 7KW
FEATURES
- Type 2 Plug 3.5KW x 2Gun
- Upto 16A @ 230V Charging
- Remote Authentication for Start and Stop
- Modern and Stylish Appearance design
- Built in network connectivity LTE( MQTT/OCPP1.6J)
Specification
| Input Power | |
| Input Rating | 230 VAC, single phase 16A, 50/60Hz per Gun |
| Number of Phase / Wire | L, N and PE (Ground), hardwired with terminal block |
| Standby Power | <15W |
| Output Power | |
| Output Rating | 230 VAC, single phase 16A, 50/60Hz per Gun |
| Charging Interface | 3.5 kW x 2Gun (IEC 62196-2) |
| Protection | |
| Upstream | In accordance with local regulations |
| Electrical Protection | Over current, Under voltage, Over voltage, Residual current, Surge protection, Short circuit, Over temperature, Ground fault, Plug-out protection, Emergency Stop |
| Automatic recovery after Nuisance Trip | The EVSE will automatically resume charging after a minor fault such as OVP, UVP, OTP or OCP. No user intervention required. |
| User Interface & Control | |
| Status Indicators | Power, Status, Charge, Fault |
| Buttons and Switch | Key switch, On/Off switch, Reset button |
| Charger Configuration | Charging Current Adjustment, Charging Duration Limitation using Remote Application |
| Communication | |
| Network Interface | LTE CAT1 Network, (Optional - Ethernet/ Bluetooth/ WIFI/ RFID) |
| Charging Protocol | MQTT, OCPP 1.6 |
| Mechanical | |
| Mechanical | Can be customized as per Customer Requirement |
| Dimension (WxHxD) / Weight | 300 x 500 x 120 mm, excluding charging cable, mounting plate and cable holder, 6kg(approx.) without package |
| Regulation | |
| Certificate / Compliance | Our Product is in compliance as per ARAI Standard |