PWM Charge Controller (IPC05/10/20)

PWM Charge Controller (IPC05/10/20) IPC05/10/20 - Dimension

(IPC05/10/20 - Dimension)

FEATURES

 
  • Automatic identification of system voltage level.
  • Four stage PWM battery charge ( Bulk, Mains, Float, Equalization).
  • Compact design.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar PV module and Battery.
  • State of battery charging indicated by LED.
  • Automatic temperature compensation.
  • Battery LVD Disconnection.

 

 

 

Specification

Model IPC - 05A IPC - 10A IPC - 20A
Nominal Battery Voltage 12V/24V (Auto Detection)
PV Open Circuit Voltage 30V @12V/ 50V @24V
Max. PV Short Circuit Current 05A 10A 20A
Max PV Input Power(12V) 75W 150W 260W
Max PV Input Power(24V) 150W 260W 500W
Boost Voltage 14.4V/ 28.8V @25°C
Equalization Charging 14.8V/29.6V @25°C
Mains Charging 14.4V/ 28.8V @25°C
Float Voltage 13.8V/27.6 V
Low Voltage disconnect 11.0V/22.0 V
Reconnect Voltage 12.8V/25.6V
Output Voltage 11.0~14.5V /22.0~29.0V
Self Consumption <10mA
Peak Conversion efficiency >96%
Max Charging Current 05A 10A 20A
Max Output Current 05A 10A 20A
Radiating mode Natural Cooling
LED indication System On, Charging, Load Error, Load Short circuit, Low voltage Disconnect, Overload
Protections PV Reverse Polarity, Battery Reverse polarity, Overcharge, Low voltage, output short circuit, Overload
Temperature Compensation ­16mV / °C
Operating Temperature 0 to 55°C
Protection Category IP20

Note:    *Specifications are subject to change without notice