Servo Stabilizer (Single phase)

Servo Stabilizer (Single phase)

FEATURES

 

Display

  • Serven Segment Digital Display

Input Connection

  • 1.2 & 3 KVA - Power Card with Plug Top
  • 5KVA & Above - Connectors

Output connection

  • 1.2 & 3 KVA - KVA Socket
  • 5KVA & Above - Connectors

Indication on front panel (LED)

  • Input On
  • Output On
  • Output Cut-off
  • Input low
  • Input high

Protection

  • High Voltage Protection With Relay / Contactor
  • Low Voltage Protection with Relay / Contactor
  • Overload & Short Circuit Protection with MCB
 

Specification

PARAMETER SPECIFICATION
Input Voltage 295 - 465V
Input Frequency 50Hz ±6%
DC Bus 120, 180, 192, 240 & 360V DC
Rectifier Bridge rectifier full wave
Charger IGBT Power factor charger
Input PF > 0.97
Charging current As per battery capacity
Charging voltage As per battery capacity
Ripple without battery < 1%
UPS output voltage 230VAC ±1% @ Single phase
Regulation ± 1%
Frequency 50Hz ±0.1
Waveform True sine wave
Total harmonic distortion < 2% minimum for linear load, 5% for non linear load
Overload capacity 125% for 10mins, 150% for 1sec
Inverter Type IGBT based PWM with instantaneous sine wave control
Duty cycle Continuous
Manual bypass Provided
Inverter Efficiency > 93%
Converter Efficiency > 94%
Converter protection MCB and HRS Fuse, soft start for 0-60 sec from input power
Inverter protection MCB and HRS Fuse,high speed pulse by pulse electronic over voltage / under voltage production, over current trip with reset
LCD Display Output voltage, DC voltage, Load in watt, batter low, Output low / high, overload

Note:   * Specifications are subject to change without notice.

              *Image shown are just indicative